Fluke 700G Manuel d'utilisateur télécharger pdf (Page 16)

700G Series

Calibration Manual

Maintenance

How to Clean the Product

Clean the Product with a soft cloth dampened with water or water and weak soap.

WCaution

To prevent possible damage to the Product, do not use

solvents or abrasive cleansers.

WCaution

For safe operation and maintenance of the product:

• Repair the Product before use if the battery leaks.

• Remove batteries to prevent battery leakage and damage to the

Product if it is not used for an extended period.

• Be sure that the battery polarity is correct to prevent battery

leakage.

• Have an approved technician repair the Product.

How to Change the Batteries

XWWarning

To prevent possible electrical shock, fire, or personal injury,

batteries must only be changed in an area known to be non-

hazardous. Explosion hazard.

To change the batteries, see Figure 1:

1. Remove the Product holster.

2. Use a Phillips screwdriver to loosen the captive screw on the battery door.

3. Remove the battery door.

4. Replace the three AA batteries.

5. Install the battery door again.

6. Tighten the captive screw.

7. Put the Product back into the holster.

gvv002.eps

Figure 1. How to Change the Batteries

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 25 26

Pas de commentaire

Fluke 700G Manuel d'utilisateur Page 16