Fluke 1522 Manuel d'utilisateur télécharger pdf (Page 32)

7 Display Functions

The insturment operates in any of several modes which determine what infor

mation is visible in the lower alphanumeric portion of the display. The MODE

button sequences through the menu functions. This button can be pressed re

peatedly until a desired mode is set. The various modes are listed below in the

order they appear. Also refer to Figure 8.

Blank - No data shown

Min/Max - Display minimum and maximum measurements (CLR to re

set)

Demand Logging - Store readings (up to 100) on demand in the memory

registers

Auto Logging - Store readings (up to 10,000) automatically in memory at

user selected intervals

Delta(x) - Display delta from reference measurement (ENT to set refer

ence)

Units: C/Ω/F/K/R - Set the units of measurement

Rate: 00000 - Set the period for serial transmission

Resol: XXX.XXX - Set the display resolution

CAL MODE - Set probe and instrument calibration parameters (MODE

button must be held for three seconds)

Note: Units, Rate, and Resol are temporary modes. The instrument returns to

Blank mode if left in any of these modes when the power is cycled.

7 Display Functions

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 59 60

Pas de commentaire

Fluke 1522 Manuel d'utilisateur Page 32