Fluke 1625Earth/Ground Manuel d'utilisateur télécharger pdf (Page 36)

1625

Users Manual

Control Loop

After turning the function rotary switch, the voltage display mode is reached.

Pushing "DISPLAY MENU" now calls up the control loop. According to the

selected measuring function, different setting values can be displayed and

changed in the control loop. The "DISPLAY MENU" button switches between

the different set values inside a contiuous loop. The "SELECT" button selects

the decimal point to be changed. Pushing the "CHANGE ITEM" button the

instrument either switches between certain set values or increases the decimal

point selected with "SELECT" by 1.

After parmeter setting has been finished the next display can be called with

"DISPLAY MENU" or the measurement can be started with "START TEST".

Depending on the selected function, the following parameters can be displayed

or changed:

Function Parameter Setting Range Remarks

display only

3pole

(AFC/94/105/111/128) Hz

48 V/20 V selectable to 20 V

with CODE

and R

0.000 Ω ... 29.99 Ω in position R

3pole only *

LIMIT 0.000 Ω ... 999 kΩ only if activated

with CODE

4pole

}(warning On/Off only if R

LIMIT

Sound) is activated with

CODE

R* On/Off only if activated

with CODE

display only R

display only

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 89 90

Pas de commentaire

Fluke 1625Earth/Ground Manuel d'utilisateur Page 36