Fluke Digital Camera 1526 Manuel d'utilisateur télécharger pdf (Page 23)

Fluke 1520

Users Manual

Measuring Resistance

1. Connect the probes to the circuit to be measured.

Measure voltage first to ensure that no hazardous voltage is

present, then switch to Ohms.

2. If the resistance is approximately 30 Ω or less, the Meter

beeps. To turn off the beeper, press the beeper button. If the

resistance is higher than 4000 Ω, >4000 Ω is displayed.

acf07f.eps

Measuring Voltage

1. Connect the probes to the circuit to be measured.

2. If the voltage is higher than 660 V, >660 V is displayed.

Warning

The Meter indicates either ac or dc voltage. If the

voltage being measured has both an ac and dc

component, the Meter displays only the largest

component of the measured signal.

acf08f.eps

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 40 41

Pas de commentaire

Fluke Digital Camera 1526 Manuel d'utilisateur Page 23