Fluke 922 Manuel d'utilisateur télécharger pdf (Page 19)

Airflow Meter

Saving Samples

intermittent readings, record maximum and minimum readings while you are away or when

you cannot watch the Meter.

To use Min Max mode, press M. The maximum reading appears first. Each subsequent

press of

M steps through the minimum, average, and live readings, and back to the

maximum reading.

To exit Min Max mode, press Mfor approximately two seconds. When in Min Max mode,

the Auto-off feature is automatically disabled.

Hold

Pressing H captures the current reading and holds it on the display. If H is pressed

while in Min Max mode, the reading is held on the display and Min Max mode continues to

store minimum and maximum values.

Saving Samples

The Meter saves various samples in its three major modes. To save a sample, do the

following:

1. When taking a sample, press I to store the sample. The Meter can save up to 99

samples in each of its three modes.

2. Once the samples are taken, press G to view the average of all the samples.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 33 34

Pas de commentaire

Fluke 922 Manuel d'utilisateur Page 19