Fluke 5020A Manuel d'utilisateur télécharger pdf (Page 95)

Digital Communications Interface

Commands 6

6-25

FORMat:TDST:STATe?

Returns the time and date stamp enable for the FETC?, MEAS?, and READ? commands.

Example: FORM:TDST:STAT?

Response: 0

A value of 1 is returned if the time and date stamp is enabled. A value of 0 is returned if

the time and date stamp is disabled.

FORMat:TDST:STATe <bool>

Sets the time and date stamp enable for the FETC?, MEAS?, and READ? commands.

Example: FORM:TDST:STAT 1

The <bool> parameter turns the time and date stamp enable on (1 or ON) or off (0 or

OFF).

MEASure? [<chn>]

Returns a comma delimited list of the most recent measurements for the specified

channel or for both channels.

Example: MEAS? 1

Example 1: MEAS? 1

Response: 25.576,29.30

Response: 1,1,25.629,C,29.32,%,2003,9,16,11,2,38

Example 2: MEAS?

Response: 25.582,29.32,26.341,37.96

Response: 1,1,25.629,C,29.29,%,2,0,C,0,%,2003,9,16,11,1,42

This command is equivalent to the FETC? command.

READ? [<chn>]

Returns a comma delimited list of the most recent measurements for the specified

channel or for both channels.

Example 1: READ? 1

Response: 25.576,29.30

Response: 1,1,25.629,C,29.32,%,2003,9,16,11,2,38

Example 2: READ?

Response: 25.582,29.32,26.341,37.96

Response: 1,1,25.629,C,29.29,%,2,0,C,0,%,2003,9,16,11,1,42

This command is equivalent to the FETC? command.

1 2 ... 90 91 92 93 94 95 96 97 98 99 100 ... 141 142

Pas de commentaire

Fluke 5020A Manuel d'utilisateur Page 95