Fluke LinkRunner Spécifications télécharger pdf (Page 29)

LinkRunner AT 1000/2000 Network Auto-Tester

Users Manual

Using the Cable Test

There are three use models for using the Cable screen:

•

Connect a cable from the top LR-AT RJ-45 connector

into the side cable test RJ-45 connector to measure

length and wire mapping.

•

Connect an open cable (non-terminated) into the top

LR-AT RJ-45 connector and measure length. An un-

terminated cable can also be traced using a Fluke

Networks IntelliTone tester and the Tone function.

•

Connect a cable into the top LR-AT RJ-45 connector

and select Tone. Using a Fluke Networks IntelliTone

tester, you can trace the wire or locate it in the switch

closet.

ffy30.bmp

Figure 19. Cable Test Results

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 38 39

Pas de commentaire

Fluke LinkRunner Spécifications Page 29